Avoid These 4 Common Mistakes When Buying New Wheels for Your Car

Using your car every day brings about wear and tear on its various components. How an owner drives and the main purpose of the car can also contribute to how quickly the parts of a car will wear down.

However, no matter how careful a driver is, car parts will inevitably need to be replaced. Wheels are one of the usual components that car owners find themselves searching the market for. But buying wheels for your car is not as straightforward as you think. There’s a variety of options when it comes to wheels, and that’s why people tend to make common mistakes when buying wheels for their car. Fortunately, companies like Wheels Direct can help you avoid these mistakes.

When it comes to buying new wheels for your car, you should consider the following:

  • Fitment

  • Directional or non-directional

  • Type of tires

  • Intended purpose

As far as mistakes go, ignoring these four factors in buying wheels can lead to buying the wrong set of wheels, wasting precious time and money. Here are the most common mistakes car owners make when buying new wheels.

  1. Disregarding Fitment

Fitment simply refers to how a wheel will fit in the wheel well—where the wheels and tires are supposed to go. In the most basic terms, knowing the car’s wheel fitment means knowing the proper size and offset the car needs. Get the configuration wrong, and expect to have performance issues or excess wear and tear.


This might be the most obvious thing that people will consider in buying wheels—its size. However, wheel sizing also has different options, ones that can affect what type of wheel you buy. Nowadays, smaller and lighter wheels are preferred, though you can’t just up and get the smallest diameter you can find. It’s better to get rims as close in size to the original ones to prevent unintended effects to other parts, like brake calipers.

Width and Offset

As important it is to find the right diameter, it’s also equally important—if not more important—to consider the width and offset of your wheels and tires. Wider rims can give you better stability, but again, simply buying wide wheels without considering offset can make for disastrous consequences.

Wide wheels will most likely need to have reduced offset so that the wheel will perform better and not interfere with other components.

  1. Not Asking About Directional Wheels

Directional wheels are sets of wheels that mirror each side of the vehicle. For example, if you look at the driver’s side of a car, the curved spokes of the wheel turn clockwise. On the passenger’s side, they will turn counter-clockwise. Non-directional wheels will come from the same mold for all four wheels, so that installing them means one side will have spokes that swoop (angled backwards) and the other side will have spokes that dig (angled forward). True directional wheels may cost more, so it is up to you to ask about these and determine if is suits you or not.

  1. Not Considering the Tires

The wheel and the tire are a set that needs to perform well together for optimal driving. Splurging on expensive wheels while buying the cheapest tires is not recommended, as cheap tires can prove to be dangerous if they wear out easily.

In addition, the type of tires you want needs to match the wheels. As we pointed out earlier, you’ll need to make adjustments to the wheel’s measurements if you want to go for smaller or wider wheels. It follows, then, that the tires will also need to be adjusted so that it fits the new wheels properly without compromising safety and performance.

A common mistake when measuring tires and wheels is converting metric measurements to standard, or vice versa. Buying European wheels for an American car can cause some measurement confusion, so be sure you know the units used and how to convert them if needed.

A good way to avoid mismatch is by buying wheel and tire sets. You can be sure that the tire fits the wheel, and it can be more cost-effective.

  1. Going for Design Over Quality

Gorgeous wheels are good, but you shouldn’t sacrifice quality for good looks. Another common mistake car owners make is not considering the intended purpose of the car. For daily driving along smooth, paved city roads or for cars that spend more time in the garage, this may not matter as much. But if your car goes through rough roads or extreme temperatures and conditions, you will fare better with high quality wheels. 

Buying wheels doesn’t have to be confusing. Contact Wheels Direct to ask about high quality wheels, and avoid the hassle of making these four common mistakes when buying new wheels.

Changing your tire size can be confusing at the best of times, especially if you’re on the lookout for a new car or looking to change your tire size on your existing vehicle.